Napoleon-fireplaces EFL100 User Manual download pdf (Page 10)

W415-1140 / A / 07.04.13

FRONT

SIDE

Fully

Recessed

Partially

Recessed

A. Remove the glass front, refer to "GLASS FRONT INSTALLATION" section for removal instructions.

B. Prior to installing the mounting brackets determine if you will be fully or partially recessing the

appliance.

C. Secure two mounting brackets to each side of the appliance use the appropriate holes, as illustrated

below. Using the 10 screws provided to secure the mounting brackets to the appliance.

D. Level the appliance and secure the brackets to wall using the 4 screws provided.

A. Once the rough opening has been prepared, and the power has been routed to the right side of the

recess, the appliance may be installed.

B. Lift the appliance up to the opening.

C. The hardwiring and electrical connection must be made prior to sliding the appliance into place.

D. Level the appliance and secure it to the wall using the brackets provided, refer to the "MOUNTING

BRACKET INSTALLATION" section.

* NOTE: In order to avoid the possibility of exposed insulation or vapour barrier coming in contact

with the appliance body, it is recommended that the walls of the appliance enclosure be "ﬁ nished"

(i.e. drywall/sheetrock), as you would ﬁ nish any other outside wall of a home. This will ensure that

clearance to combustibles is maintained within the cavity. Framing dimensions will need to be adjusted

to account for the enclosure ﬁ nishing material thickness.

** With a 1/2" (12.7mm) thick ﬁ nishing material.

D* 21" (533.4mm)

E* 95" (2413mm)

3.3.4 MOUNTING BRACKET INSTALLATION

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

No comments

Napoleon-fireplaces EFL100 User Manual Page 10