Napoleon-fireplaces GSS42 User Manual download pdf (Page 12)

W415-0617 / E / 06.13.12

5.0 FINISHING

5.1 ANDIRON AND GRATE ASSEMBLY

WARNING

FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE

ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY

DAMAGE OR PERSONAL INJURY.

LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE

PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED

IGNITION MAY OCCUR.

THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.

76.1A

PHAZER

logs and glowing embers exclusive to Napoleon, provide a unique and realistic glowing effect that is

different in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect.

Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colour

pigments burn in during the heat activated curing process.

5.2 LOG PLACEMENT

Use only accessories

designed for and listed

with your specific log

set.

A. With the 2 andirons laying face down, secure the grate

overtop using 2 of the 1” hex head screws (supplied in the

manual baggie).

B. Install the grate/andiron assembly to the burner base using

4 x 1” hex head screws (supplied in the manual baggie).

A. Place the rear log #1 onto the locating pins

along the back edge of the burner.

PORT CAVITY

B. Position log #2 onto the locator pins on

the burner. Ensure the port cavity on the

underside of the log is positioned such that

it runs over the ports allowing them to be

exposed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

No comments

Napoleon-fireplaces GSS42 User Manual Page 12