Napoleon-fireplaces GDIZC-P User Manual download pdf (Page 8)

W415-0223 / D / 01.12.04

Positioning the logs improperly will cause flame im-

pingement and carboning.

PHAZER

logs and glowing embers, exclusive to Napoleon

Fireplaces, glow when exposed to direct flame and provide

a unique and realistic glowing effect that is different in every

installation. Take the time to carefully position the glowing

embers for a maximum glowing effect. Use only certified

PHAZER

logs available from your Napoleon / Wolf Steel

Ltd. dealer.

1. Place the rear log (#1) onto the two log supports and

against the air intake pipe.

2. Position logs #2 and #3 against the grate posts and line up

the studs located on the burner with the holes on the bottom

of the logs. Keep slightly back of the front row of ports.

3. Fit the centre log (#4) into place behind log #3 and into

the pocket provided on the back log.

This can vary according to the mantle depth. Use the graph

to help evaluate the clearance needed.

4. Tear the glowing embers into pieces and place along

the front row of ports covering all of the burner area in front

of the logs. Care should be taken to shred the embers into

thin, small irregular pieces as only the exposed edges of

the fibre hairs will glow. The ember material will only glow

when exposed to direct flame; however, care should be

taken to not block the burner ports. Blocked burner ports

can cause an incorrect flame pattern, carbon deposits and

delayed ignition.

Log colours may vary. During the initial use of the fireplace,

the colours will become more uniform as colour pigments

burn in during the heat activated curing process.

FIGURE 17

ANTLE WIDTH

FIGURE 16

LOWER DOOR BRACKET

FIGURE 12

FIGURE 13

FIGURE 14

Place the door into the two lower door brackets, and se-

cure at the top of the unit with two #10-24 machine screws.

FIGURE 15

GLOWING EMBERS

Remove the backing of the logo supplied and place on the

glass viewing door, as indicated.

½”

LOGO

LOG PLACEMENT DOOR INSTALLATION

MANTLE CLEARANCE

LOGO PLACEMENT

FIGURE 18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Napoleon-fireplaces GDIZC-P User Manual Page 8

Comments to this Manuals

Related products and manuals for Kiln Napoleon-fireplaces GDIZC-P