Napoleon-fireplaces GI3016-P User Manual

1W415-0171 / E / 01.10.05INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON

10W415-0171 / E / 01.10.05If your masonry fireplace is equipped with a fresh air inletin the floor of the firebrick chamber, the insert is able totake

11W415-0171 / E / 01.10.053. Check to see that all burner ports are burning. Clean outany of the ports which may not be burning or are not burn-ing p

12W415-0171 / E / 01.10.05# PART NO.DESCRIPTION1 GZ-551 REPLACEMENT BLOWER2 W725-0036 NATURAL GAS VALVE C/W ADJUSTABLE REGULATOR2 W725-0037 PROPANE G

13W415-0171 / E / 01.10.05

14W415-0171 / E / 01.10.05Gas piping is undersized.Pilot goes out whilestanding; Main burneris in 'OFF' position.- turn on all gas applianc

15W415-0171 / E / 01.10.05Main burner goes out;pilot goes out.A - Refer to "Main burner goes out; pilot stays on"B - Chimney down-drafting-

16W415-0171 / E / 01.10.05Wolf Steel Fireplace Service HistoryThis fireplace must be serviced annually depending on usage.DateService Technician N

2W415-0171 / E / 01.10.0510-11 OPERATION / MAINTENANCEOperating InstructionsFresh Air Damper SystemMaintenance11 BLOWER INSTALLATIONBlower Replacem

3W415-0171 / E / 01.10.05NAPOLEON gas fireplaces are manufactured under the strict Standard of the world recognizedISO 9001 : 2000 Quality Assurance C

4W415-0171 / E / 01.10.05The fireplace, when installed, must be electrically con-nected and grounded in accordance with local codes. Inthe absence of

5W415-0171 / E / 01.10.05FIGURE 4FIGURE 3Do not use abrasive cleaners to clean these parts. Bufflightly with a clean dry cloth. Porcelain enamelled co

6W415-0171 / E / 01.10.05FIGURE 7FIGURE 8This is a thermally activated switch, attached to the back ofthe unit and extending up into the dilution draf

7W415-0171 / E / 01.10.05Remove the secur-ing screws locatedon either of the fire-box sides as illus-trated. Removeprotective plasticwrap from all fou

8W415-0171 / E / 01.10.05Attach the lower glass bracket.Seat the glass inside the bracketand using two screws attach theupper glass bracket, as shown.

9W415-0171 / E / 01.10.05SPRING CLIPFIGURES 16RETAINER TABWith the bay chassis ona flat surface, insert thefront glass (bottom first)and centred to th