Napoleon-fireplaces Vector 50 - LHD50 User Manual download pdf (Page 47)

W415-0745 / F / 08.26.13

The auxiliary function controls the AUX power outlet on

the Control Module which controls the Crystalites™.

A. Use the Mode Key to guide you to the AUX

icon.

B. Pressing the Up Arrow Key will activate the

Crystalites™.

C. Pressing the Down Arrow Key will turn the

Crystalites™ off. A single “beep” will conﬁ rm the reception of the command.

35.11A

°F

OFF

°F

DRAFT

This function will lock the keys to avoid unsupervised operation.

A. Press the MODE and UP keys at the same time.

B. To de-activate this function, press the MODE and UP keys at the same time.

35.10A

°F

8.8 CHILD PROOF FUNCTION

8.9 CRYSTALITES

8.10 LOW BATTERY / MANUAL BYPASS

8.11 IN THE EVENT OF A POWER FAILURE

If the receiver is equipped with batteries they will enable ﬂ ame height control or ON/OFF function to control

the ﬁ replace during a power failure. Refer to “APPLIANCE OPERATION” section when communications

between receiver and transmitter have been lost. The receiver will emit a “beep” sound to conﬁ rm

programming has been successful once power is restored. During a power failure, if the ﬁ replace was on, the

ﬂ ame height will stay at the setting prior to the failure. If off when the failure occurs and then turned on, the

ﬂ ame height will come on at “HI”. The ﬂ ame height can then be controlled by the remote.

35.14A

The life span of the remote batteries depends on various factors: quality of the

batteries, the number of ignitions, etc.

When the transmitter batteries are low, a Battery Icon will appear on the LCD

display before all battery power is lost. When the batteries are replaced this icon will

disappear.

Not applicable when plugged into 110V.

When the receiver batteries are low, no “beep” will be emitted from the receiver

when it receives an ON/OFF command. This in an alert for the receiver that there’s

low battery. When the batteries are replaced the “beep” will be emitted from the

receiver when the ON/OFF key is pressed.

If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding the

three position slider switch on the receiver to the “ON” position. This will bypass the remote control feature

and the appliance main burner will come on if the gas valve is in the “ON” position.

35.13A

°F

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 135 136

Comments to this Manuals

No comments

Napoleon-fireplaces Vector 50 - LHD50 User Manual Page 47

Comments to this Manuals

Related products and manuals for Kiln Napoleon-fireplaces Vector 50 - LHD50