Napoleon-fireplaces Vector 50 - LHD50 User Manual download pdf (Page 56)

W415-0745 / F / 08.26.13

11.8 LAMP REPLACEMENT

This appliance comes equipped with our

“Crystalites™”. If in the event the lamp needs to be

replaced, follow these instructions.

A. Turn off all electrical supply.

B. Remove the glass door and media tray

from the ﬁ rebox, see “DOOR REMOVAL /

INSTALLATION” and “BURNER REMOVAL”

section.

C. Unscrew the lens cover and lift the lamp

straight out. Replace with Wolf Steel Ltd. parts

only (W387-0009).

D. NOTE: Do not handle the lamp with bare

ﬁ ngers, protect with a clean dry cloth.

E. Replace lens cover.

F. Replace glass door and media tray.

CRYSTALITES

A. Remove the glass and glass ember tray.

B. Remove the burner base from the ﬁ rebox.

C. Compress the retainer ﬁ ns and lift out the lens assembly. Disconnect the

wires.

D. Replace lens assembly by aligning key hole and snap into place. Re-

connect the wires.

E. Re-install burner base ensuring a good ﬁ rebox seal.

F. Re-install glass ember tray and glass.

NOTE: When removing the glass ember tray make sure the glass embers are away from the center of

the screen, exposing the burner, before lifting glass ember tray out.

When replacing burner, absolutely no glass embers can be in cup surrounding the oriﬁ ce. HINT: If glass falls

into cup and surrounds the oriﬁ ce, insert a clean bag into a vacuum cleaner and vacuum out glass

embers. Replacement glass embers can be ordered from Wolf Steel Ltd.

KEY HOLE

11.9 LENS ASSEMBLY REPLACEMENT

THE FRONT OF THE APPLIANCE BECOMES VERY HOT DURING OPERATION. LET THE APPLIANCE

COOL COMPLETELY BEFORE CONDUCTING SERVICE.

WARNING

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 135 136

No comments

Napoleon-fireplaces Vector 50 - LHD50 User Manual Page 56