Napoleon-fireplaces Vector 45 - LHD45 User Manual download pdf (Page 36)

W415-0834 / E / 06.13.13

6.5 GLASS EMBERS

NOTE: Care must be taken to ensure glass embers are kept .250” (6.35mm) clear of the pilot area on

the media tray and aren’t interfering with the pilot operation.

Glass embers must not cover burner ports.

When the ﬂ ames impinge on the glass, the glass may discolour slightly and the edges may soften.

74.2B

Evenly spread the glass media onto the media tray, ensuring no glass media falls into the pilot opening. If this

happens, insert a clean bag into your vacuum cleaner and vacuum out the glass media. Replacement glass

can be purchased from your local authorized dealer / distributor.

CLEANING GLASS MEDIA

Glass media may have a ﬁ ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild

dish soap, drain, rinse thoroughly and dry before placing around the burner.

CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE

THAT IT IS DRY.

DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF

REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED

DEALER / DISTRIBUTOR.

DO NOT PLACE ANY MEDIA (GLASS OR VERMICULITE) IN OR AROUND THE PILOT OPENING. THIS WILL

INTERFERE WITH THE PILOT OPERATION

WARNING

PILOT

AREA

BURNER

PORTS

WARNING: DO NOT PLACE MEDIA ON OR AROUND THE PILOT, THIS WILL INTERFERE WITH PILOT

OPERATION. USE ONLY MEDIA APPROVED FOR USE WITH THIS APPLIANCE. DO NOT OVERFILL

MEDIA, USE ONLY THE AMOUNT SUPPLIED WITH THE APPLIANCE.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 119 120

No comments

Napoleon-fireplaces Vector 45 - LHD45 User Manual Page 36