Napoleon-fireplaces Vector 45 - LHD45 User Manual download pdf (Page 37)

W415-0834 / E / 06.13.13

7.0 OPTIONAL BLOWER INSTALLATION

WARNING

RISK OF FIRE AND ELECTRICAL SHOCK.

TURN OFF THE GAS AND ELECTRICAL POWER BEFORE SERVICING THIS APPLIANCE.

USE ONLY WOLF STEEL APPROVED OPTIONAL ACCESSORIES AND REPLACEMENT PARTS WITH

THIS APPLIANCE. USING NON-LISTED ACCESSORIES (BLOWERS, DOORS, LOUVRES, TRIMS, GAS

COMPONENTS, VENTING COMPONENTS, ETC.) COULD RESULT IN A SAFETY HAZARD AND WILL

VOID THE WARRANTY AND CERTIFICATION.

ENSURE THAT THE FAN’S POWER CORD IS NOT IN CONTACT WITH ANY SURFACE OF THE

APPLIANCE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT RUN THE POWER

CORD BENEATH THE APPLIANCE.

THE WIRE HARNESS PROVIDED IN THE BLOWER KIT IS A UNIVERSAL HARNESS. WHEN

INSTALLED, ENSURE THAT ANY EXCESS WIRE IS CONTAINED, PREVENTING IT FROM MAKING

CONTACT WITH MOVING OR HOT OBJECTS.

51.5

7.1 ACCESSING THE BLOWER

WARNING

BE CAREFUL NOT TO TEAR THE BURNER TRAIN GASKET. A REPLACEMENT GASKET CAN BE

ORDERED FROM YOUR LOCAL AUTHORIZED DEALER / DISTRIBUTOR.

7.1.1 BURNER REMOVAL

A. Remove the door, see “DOOR REMOVAL / INSTALLATION” section.

B. Remove the 20 screws (8 per side and each corner) that secure the media tray in place. Using the

lifting handles lift the tray up and out.

C. Remove the 4 screws that secure the burner in place. Lift the burner up and out.

MEDIA

TRAY

LIFTING

HANDLES

BURNER

HELPFUL HINT: Prior to ﬁ nishing in the appliance, we recommend installing the blower through the

pre-ﬁ nishing access panel.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 119 120

No comments

Napoleon-fireplaces Vector 45 - LHD45 User Manual Page 37