Napoleon-fireplaces Vector 45 - LHD45 User Manual download pdf (Page 7)

W415-0834 / E / 06.13.13

2.3 GENERAL INFORMATION

APPLIANCE

NG LP

Altitude (FT) 0-4,500 0-4500

Max. Input (BTU/HR) 24,000 24,000

Max. Output Steady State (BTU/HR) 17,280 17,280

Efﬁ ciency (w/the fan on) 72% 72%

Min. Inlet Gas Supply Pressure 4.5" WC (11.2mb) 11" WC (27.4mb)

Max. Inlet Gas Supply Pressure 7" WC (17.4mb) 13" WC (32.4mb)

Manifold Pressure (Under Flow Conditions) 3.5" WC (8.7mb) 10" WC (25mb)

FOR YOUR SATISFACTION, THIS APPLIANCE HAS BEEN TEST-FIRED TO ASSURE ITS OPERATION AND

QUALITY!

When the appliance is installed at elevations above 4,500ft (1371.6m), and in the absence of speciﬁ c

recommendations from the local authority having jurisdiction, the certiﬁ ed high altitude input rating shall be reduced at

the rate of 4% for each additional 1,000ft (304.8m).

This appliance is approved for bathroom, bedroom and bed-sitting room installations and is certiﬁ ed for mobile home

installation.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible

for use with other gases, unless a certiﬁ ed kit is used.

Expansion / contraction noises during heating up and cooling down cycles are normal and are to be expected.

NOTE: The protective wrap on plated parts is best removed when the assembly is at room temperature but this

can be improved if the assembly is warmed, using a hair dryer or similar heat source.

1 2 3 4 5 6 7 8 9 10 11 12 ... 119 120

No comments

Napoleon-fireplaces Vector 45 - LHD45 User Manual Page 7